Tips in Removing Textured Ceiling


Removing Popcorn Ceiling is an intriguing job. It not just includes extracting the old ceiling, but likewise involves rewiring the house so that a new ceiling can be installed. But before you go ahead with the job, you should do the proper research about the whole process so that you understand what to expect. And in case you are not familiar with the removal of the popcorn ceiling, here is a step by step guide that will help you.

When extracting popcorn ceiling, ensure that you use protective gloves and safety glasses, as they will protect you from any danger of injury when working. After selecting the preferred extraction specialist, visit his office and make certain that whatever is ready for the task. In addition to the equipment, you will need to rent or buy a saw, screwdriver, hammer and other tools. Likewise, bring any heavy items with you to make certain that they too are safe during the removal.

There are 2 common techniques of removing popcorn ceilings. The first one is to use drywall glue or tape to slow to the ceiling. The advantage of this method is that it requires little effort; however, the issue with it is that it may not entirely extract the popcorn. Furthermore, the drywall glue or tape is a bit messy, which might make the entire job tough.

The 2nd recommended way for removing popcorn ceiling is by using drilling makers or strong industrial trucks with cranes to extract them. In order to successfully extract it, make sure that you remove all the lights and other heavy fixtures present on the ceiling. Furthermore, extract all the tiles and lighting fixtures present in the room. Remove any kind of decorations to make it simpler to access the screws top popcorn ceiling removal - Popcorn Ceiling Removal Austin or the jambs that can be extracted.

Scrapers are used for smoothing out the texture or covering on the walls and ceiling. It is best to use an old toothbrush or cotton swab as it allows scraping without harming your floorings or furnishings. Bear in mind that if there is any texture on the wall, make certain to smooth it out using scraper. Nevertheless, if you are planning to scrape without harming your surfaces, you can use the exact same object for learn this here now the function. Just wet the object, spread it on the wall and permit it to sink into the wall or flooring.

Use the fiber brush and scrape along the surface of the product. Ensure you wear security gloves when utilizing the asbestos scraper to prevent getting exposed to the compound. If the substance is exposed, it might cause some health issue like shortness of breath, coughing, swelling of the lung tissue and other associated health problems. When you have actually scraped enough, you need to now be able to see the popcorn. Now that the popcorn is removed, you can proceed to the painting job.

Prior to using the paint, you need to remove all decors on the ceilings. It is better to extract them before applying the paint since you will not have to sand them later. The next action is to use a thin coat of paint on the ceiling utilizing the supplied brush. This will cover the popcorn texture left on the ceilings.

For the third and last action, place the textured ceiling panels on top of the old one and let it dry for a few hours. You can then return to the lighting fixtures and replace the lighting fixtures. Before setting up the lights on the ceilings, ensure that the panels are set up appropriately so that there is a new layer of texture used which the new layer matches the texture of the ceiling perfectly.

Learn More:

Popcorn Ceiling Removal Austin

2882 Barton Skyway #239 A

Austin, TX 78746